Racepak.com

Data Acquisition, Performance Instrumentation & Power Distribution
It is currently Wed Sep 20, 2017 2:49 pm

All times are UTC




Post new topic Reply to topic  [ 37 posts ]  Go to page Previous  1, 2, 3, 4  Next
Author Message
 Post subject: Re: Custom Runlog Pages
PostPosted: Fri May 19, 2017 9:51 am 
Offline

Joined: Sun Sep 27, 2015 9:55 pm
Posts: 75
NICE, may have to do a similar change.

I have been working on the tyre page to collect some more data as well as perform some additional calculations, including red/green lights for camber.

Also included a G Plot for the session. Would be nice to also have all the lap times displayed on the same page (HINT)

ImageAR-1 TEST by Eipeip, on Flickr

Code:
<TITLE CATEGORY = "Car Setup">Tire Data_TEST</TITLE>
<A HELP=43><IMG SRC="\\LogHelp.bmp" ></A>

\\left front tire pressure information
<ORIGIN>
<BR LINES=2>
<TAB DLGUNITS=100>LF PRESSURE<BR LINES=2>
<TAB DLGUNITS=30>Cold<INPUT TYPE=text NAME="LF_Cold" SIZE=10>Hot<INPUT TYPE=text NAME="LF_Hot" SIZE=10>Gain<INPUT TYPE=expression UPDATEDBY= (LF_Cold, LF_Hot) VALUE="(LF_Hot - LF_Cold)"><BR>
<TAB DLGUNITS=30>LF Camber<INPUT TYPE=text NAME="LF_Camber" SIZE=10>
<INPUT TYPE=expression NAME="LF_C_Value" UPDATEDBY= (LF_1, LF_2, LF_3) VALUE="((LF_3-LF_1)/2)">
<LIGHT VALUE = "LF_C_Value" COLS=10  ROWS=5 BOUNDS = "(GREEN(),2,RED())" UPDATEDBY= (LF_1, LF_2, LF_3) > <BR LINES=2>

<TAB DLGUNITS=30>LF Toe       <INPUT TYPE=text NAME="LF_Toe" SIZE=10><BR LINES=2>
<TAB DLGUNITS=30>LF Caster  <INPUT TYPE=text NAME="LF_Caster" SIZE=10><BR LINES=2>

\\left front tire temp information
<ORIGIN>
<BR LINES=12>
<TAB DLGUNITS=50>LEFT FRONT TEMPS<BR LINES=2>
<TAB DLGUNITS=25><INPUT TYPE=text NAME="LF_1" SIZE=10><INPUT TYPE=text NAME="LF_2" SIZE=10><INPUT TYPE=text NAME="LF_3" SIZE=10><BR LINES=3>

\\left front temp average
<ORIGIN>
<BR LINES=16>
<TAB DLGUNITS=30>LF AVG<INPUT TYPE=expression UPDATEDBY= (LF_1, LF_2, LF_3) VALUE="(LF_1 + LF_2+LF_3) / 3"><BR LINES=3>

\\front tire temp average
<ORIGIN>
<BR LINES=14>
<TAB DLGUNITS=220>FRONT TEMP AVG<BR LINES=2>
<TAB DLGUNITS=220><INPUT TYPE=expression UPDATEDBY= (LF_1, LF_2, LF_3,RF_1, RF_2, RF_3) VALUE="(LF_1 + LF_2+LF_3+RF_1+RF_2+RF_3) / 6"><BR LINES=3>

\\right front tire temp information
<ORIGIN>
<BR LINES=12>
<TAB DLGUNITS=470>RIGHT FRONT TEMPS<BR LINES=2>
<TAB DLGUNITS=445><INPUT TYPE=text NAME="RF_1" SIZE=10><INPUT TYPE=text NAME="RF_2" SIZE=10><INPUT TYPE=text NAME="RF_3" SIZE=10><BR LINES=3>

\\right front temp average
<ORIGIN>
<BR LINES=16>
<TAB DLGUNITS=450>RF AVG<INPUT TYPE=expression UPDATEDBY= (RF_1, RF_2, RF_3) VALUE="(RF_1 + RF_2+RF_3) / 3"><BR LINES=3>

\\right front tire pressure information
<ORIGIN>
<BR LINES=2>
<TAB DLGUNITS=470>RF PRESSURE<BR LINES=2>
<TAB DLGUNITS=404>Cold<INPUT TYPE=text NAME="RF_Cold" SIZE=10>Hot<INPUT TYPE=text NAME="RF_Hot" SIZE=10>Gain<INPUT TYPE=expression UPDATEDBY= (RF_Cold, RF_Hot) VALUE="(RF_Hot - RF_Cold)"><BR>
<TAB DLGUNITS=404>RF Camber<INPUT TYPE=text NAME="RF_Camber" SIZE=10>
<INPUT TYPE=expression NAME="RF_C_Value" UPDATEDBY= (RF_1, RF_2, RF_3) VALUE="((RF_1-RF_3)/2)">
<LIGHT VALUE = "RF_C_Value" COLS=10  ROWS=5 BOUNDS = "(GREEN(),2,RED())" UPDATEDBY= (RF_1, RF_2, RF_3)> <BR LINES=2>

<TAB DLGUNITS=404>RF Toe       <INPUT TYPE=text NAME="RF_Toe" SIZE=10><BR LINES=2>
<TAB DLGUNITS=404>RF Caster  <INPUT TYPE=text NAME="RF_Caster" SIZE=10><BR LINES=2>

\\rear tire temp avg
<ORIGIN>
<BR LINES=18>
<TAB DLGUNITS=220>REAR TEMP AVG<BR LINES=2>
<TAB DLGUNITS=220><INPUT TYPE=expression UPDATEDBY= (LR_1, LR_2, LF_3,RR_1, RR_2, RR_3) VALUE="(LR_1 + LR_2+LR_3+RR_1+RR_2+RR_3) / 6"><BR LINES=3>

\\left tire temp avg
<ORIGIN>
<BR LINES=16>
<TAB DLGUNITS=150>LEFT TEMP AVG<BR LINES=2>
<TAB DLGUNITS=150><INPUT TYPE=expression UPDATEDBY= (LR_1, LR_2, LF_3,LF_1, LF_2, LF_3) VALUE="(LR_1 + LR_2+LR_3+LF_1+LF_2+LF_3) / 6"><BR LINES=3>

\\right tire temp avg
<ORIGIN>
<BR LINES=16>
<TAB DLGUNITS=300>RIGHT TEMP AVG<BR LINES=2>
<TAB DLGUNITS=300><INPUT TYPE=expression UPDATEDBY= (RR_1, RR_2, RR_3,RF_1, RF_2, RF_3) VALUE="(RR_1 + RR_2+RR_3+RF_1+RF_2+RF_3) / 6"><BR LINES=3>

\\left rear tire temp information
<ORIGIN>
<BR LINES=20>
<TAB DLGUNITS=50>LEFT REAR TEMPS<BR LINES=2>
<TAB DLGUNITS=25><INPUT TYPE=text NAME="LR_1" SIZE=10><INPUT TYPE=text NAME="LR_2" SIZE=10><INPUT TYPE=text NAME="LR_3" SIZE=10><BR LINES=3>

\\left rear temp average
<ORIGIN>
<BR LINES=24>
<TAB DLGUNITS=30>LR AVG<INPUT TYPE=expression UPDATEDBY= (LR_1, LR_2, LR_3) VALUE="(LR_1 + LR_2+LR_3) / 3"><BR LINES=3>

\\left rear tire pressure information
<ORIGIN>
<BR LINES=27>
<TAB DLGUNITS=100>LR PRESSURE<BR LINES=2>
<TAB DLGUNITS=30>Cold<INPUT TYPE=text NAME="LR_Cold" SIZE=10>Hot<INPUT TYPE=text NAME="LR_Hot" SIZE=10>Gain<INPUT TYPE=expression UPDATEDBY= (LR_Cold, LR_Hot) VALUE="(LR_Hot - LR_Cold)"><BR>
<TAB DLGUNITS=30>LR Camber<INPUT TYPE=text NAME="LR_Camber" SIZE=10>
<INPUT TYPE=expression NAME="LR_C_Value" UPDATEDBY= (LR_1, LR_2, LR_3) VALUE="((LR_3-LR_1)/2)">
<LIGHT VALUE = "LR_C_Value" COLS=10  ROWS=5 BOUNDS = "(GREEN(),2,RED())" UPDATEDBY= (LR_1, LR_2, LR_3)> <BR LINES=2>
<TAB DLGUNITS=30>LR Toe       <INPUT TYPE=text NAME="LR_Toe" SIZE=10><BR LINES=2>

\\right rear tire temp information
<ORIGIN>
<BR LINES=18>
<TAB DLGUNITS=470>RIGHT REAR TEMPS<BR LINES=2>
<TAB DLGUNITS=445><INPUT TYPE=text NAME="RR_1" SIZE=10><INPUT TYPE=text NAME="RR_2" SIZE=10><INPUT TYPE=text NAME="RR_3" SIZE=10><BR LINES=3>

\\right rear temp average
<ORIGIN>
<BR LINES=22>
<TAB DLGUNITS=450>RR AVG<INPUT TYPE=expression UPDATEDBY= (RR_1, RR_2, RR_3) VALUE="(RR_1 + RR_2+RR_3) / 3"><BR LINES=3>

\\right rear tire pressure information
<ORIGIN>
<BR LINES=27>
<TAB DLGUNITS=470>RR PRESSURE<BR LINES=2>
<TAB DLGUNITS=404>Cold<INPUT TYPE=text NAME="RR_Cold" SIZE=10>Hot<INPUT TYPE=text NAME="RR_Hot" SIZE=10>Gain<INPUT TYPE=expression UPDATEDBY= (RR_Cold, RR_Hot) VALUE="(RR_Hot - RR_Cold)"><BR>
<TAB DLGUNITS=404>RR Camber<INPUT TYPE=text NAME="RR_Camber" SIZE=10>
<INPUT TYPE=expression NAME="RR_C_Value" UPDATEDBY= (RR_1, RR_2, RR_3) VALUE="((RR_1-RR_3)/2)">
<LIGHT VALUE = "RR_C_Value" COLS=10  ROWS=5 BOUNDS = "(GREEN(),2,RED())" UPDATEDBY= (RR_1, RR_2, RR_3)> <BR LINES=2>
<TAB DLGUNITS=404>RR Toe       <INPUT TYPE=text NAME="RR_Toe" SIZE=10><BR LINES=2>

\\G Plot
<ORIGIN>
<BR LINES=4>
<TAB DLGUNITS=850>

<CHART
XNAME="Lateral G" YNAME="Accel G" SYMBOL=Point
TIMEMIN="$ChartTimeMin" TIMEMAX="$ChartTimeMax"
XMIN="$IOName2Min(Lateral G)" XMAX ="$IOName2Max(Lateral G)"
YMIN="$IOName2Min(Accel G)" YMAX ="$IOName2Max(Accel G)"
BACKGROUND=GREY() FOREGROUND=RED()
ROWS=30 COLS=80
UPDATEDBY = ($CarretTime)
>

<CHART ATTACH2PREV
XNAME="CircleX 1.2" YNAME="CircleY 1.2" SYMBOL=Point
TIMEMIN="$ChartTimeMin" TIMEMAX="$ChartTimeMax"
XMIN="$IOName2Min(Lateral G)" XMAX ="$IOName2Max(Lateral G)"
YMIN="$IOName2Min(Accel G)" YMAX ="$IOName2Max(Accel G)"
BACKGROUND=GREY() FOREGROUND="LIGHT(BLUE())"
ROWS=30 COLS=80
UPDATEDBY = ($CarretTime)
>


\\Comments
<ORIGIN>
<BR LINES=0>
<TAB DLGUNITS=580>COMMENTS:  <TEXTAREA NAME=Comments COLS=50 ROWS=20></TEXTAREA><BR>
<BR>


Top
 Profile  
 
 Post subject: Re: Custom Runlog Pages
PostPosted: Fri Jun 23, 2017 5:09 pm 
Offline

Joined: Wed Feb 27, 2008 7:19 pm
Posts: 88
this is where ive seen them images
they appeared on a track group today on facebook and i thought it looked like datalink

i emailed support to see if they could help with unlocking my system for editing runlog pages but never got a response


Top
 Profile  
 
 Post subject: Re: Custom Runlog Pages
PostPosted: Sat Jun 24, 2017 8:16 pm 
Offline

Joined: Sat Apr 11, 2009 2:05 am
Posts: 54
nigel b wrote:
this is where ive seen them images
they appeared on a track group today on facebook and i thought it looked like datalink

i emailed support to see if they could help with unlocking my system for editing runlog pages but never got a response


I'd recommend e-mailing Tim Anderson directly: tim@racepak.com

Would you mind sharing what Facebook group is talking about this stuff? I'm curious what's being discussed and I'm always looking for new ideas.


Top
 Profile  
 
 Post subject: Re: Custom Runlog Pages
PostPosted: Sat Jun 24, 2017 8:39 pm 
Offline

Joined: Sun Sep 27, 2015 9:55 pm
Posts: 75
I would guess Time Attack Builders
https://m.facebook.com/groups/1134021793283517?view=permalink&id=1574961859189506&comment_id=1575966752422350&notif_t=group_comment_reply&notif_id=1498258387124735&ref=m_notify

Or a page called 'Car Drives Man'


Top
 Profile  
 
 Post subject: Re: Custom Runlog Pages
PostPosted: Sat Jun 24, 2017 8:48 pm 
Offline

Joined: Sat Apr 11, 2009 2:05 am
Posts: 54
Thanks, I'll check it out.


Top
 Profile  
 
 Post subject: Re: Custom Runlog Pages
PostPosted: Sat Jun 24, 2017 10:33 pm 
Offline

Joined: Sun Sep 27, 2015 9:55 pm
Posts: 75
Problem....

Trying to put lap times/numbers on my tyre page (under the comments) but cannot seem to get the XYZ table to draw under the comments.

Image

Code:
<TITLE CATEGORY="MAP Analysis">Segment Report TEST</TITLE>

<ORIGIN>
<BR LINES=16>
Lap #<TAB DLGUNITS=0>
Lap Time<TAB DLGUNITS=50>


<XYTABLE XSIZE="$LapTime" YSIZE=1 STYLE="STYLE_protected()+ALIGN_center()" ROWS=1.3 COLS=12 COLSPACE=1 IN="$LapTime(x+_Seg_Start)" RESETBY=($LapTime)>
<BR>

<XYTABLE XSIZE=1 YSIZE= 1 STYLE="STYLE_protected()+ALIGN_left()" ROWS=1.3 COLS=10 IN="$FOut(%lg,$Lap)" UPDATEDBY=($Lap)>
<TAB DLGUNITS=0>

<XYTABLE XSIZE=1 YSIZE= 1 STYLE="STYLE_protected()+STYLE_frame()+ALIGN_right()" ROWS=1.3 COLS=11 ROWSPACE=0.5 IN="$FmtMinSec($LapTime($Lap))" UPDATEDBY=($Lap)>
<TAB DLGUNITS=50>

<XYTABLE XSIZE="$LapTime" YSIZE=1 STYLE="STYLE_protected()+STYLE_frame()+ALIGN_right()" ROWS=1.3 COLS=12
         COLSPACE=1 ROWSPACE=0.5 IN="$FOut(%8.3lf,$LapTime($Lap,x+_Seg_Start))" UPDATEDBY=($Lap) RESETBY=($LapTime)>

<BR>

<TAB DLGUNITS=0>
<XYTABLE XSIZE=1 YSIZE="$LapNumber-1" STYLE="STYLE_protected()+ALIGN_left()" ROWS=1.3 COLS=10 ROWSPACE=0.5 IN="$FOut(%lg,y)">
<TAB DLGUNITS=50>
<XYTABLE XSIZE=1 YSIZE="$LapNumber-1" STYLE="ALIGN_right()+IF($LapTime(y)<$LapTime($Lap),STYLE_sunken()+STYLE_protected()+LIGHT(GREEN()),STYLE_protected())"

ROWS=1.3 COLS=11 ROWSPACE=0.5 IN="$FmtMinSec($LapTime(y))" RESETBY=($Lap)>


Top
 Profile  
 
 Post subject: Re: Custom Runlog Pages
PostPosted: Sat Jun 24, 2017 11:08 pm 
Offline

Joined: Sat Apr 11, 2009 2:05 am
Posts: 54
Ahhh. I think I see the issue. Don't think of "<TAB DLGUNITS=50>" as saying tab over 50 units from the current position. Instead, think of it as tab to column 50 from no matter where you are. Try something like this:

Quote:
<TITLE CATEGORY="MAP Analysis">Segment Report TEST</TITLE>

<ORIGIN>
<BR LINES=16>
<TAB DLGUNITS=700>Lap #<TAB DLGUNITS=0>
<TAB DLGUNITS=750>Lap Time


<XYTABLE XSIZE="$LapTime" YSIZE=1 STYLE="STYLE_protected()+ALIGN_center()" ROWS=1.3 COLS=12 COLSPACE=1 IN="$LapTime(x+_Seg_Start)" RESETBY=($LapTime)>
<BR>

<TAB DLGUNITS=700><XYTABLE XSIZE=1 YSIZE= 1 STYLE="STYLE_protected()+ALIGN_left()" ROWS=1.3 COLS=10 IN="$FOut(%lg,$Lap)" UPDATEDBY=($Lap)>


<TAB DLGUNITS=750><XYTABLE XSIZE=1 YSIZE= 1 STYLE="STYLE_protected()+STYLE_frame()+ALIGN_right()" ROWS=1.3 COLS=11 ROWSPACE=0.5 IN="$FmtMinSec($LapTime($Lap))" UPDATEDBY=($Lap)>


<XYTABLE XSIZE="$LapTime" YSIZE=1 STYLE="STYLE_protected()+STYLE_frame()+ALIGN_right()" ROWS=1.3 COLS=12
COLSPACE=1 ROWSPACE=0.5 IN="$FOut(%8.3lf,$LapTime($Lap,x+_Seg_Start))" UPDATEDBY=($Lap) RESETBY=($LapTime)>

<BR>

<TAB DLGUNITS=700>
<XYTABLE XSIZE=1 YSIZE="$LapNumber-1" STYLE="STYLE_protected()+ALIGN_left()" ROWS=1.3 COLS=10 ROWSPACE=0.5 IN="$FOut(%lg,y)">
<TAB DLGUNITS=750>
<XYTABLE XSIZE=1 YSIZE="$LapNumber-1" STYLE="ALIGN_right()+IF($LapTime(y)<$LapTime($Lap),STYLE_sunken()+STYLE_protected()+LIGHT(GREEN()),STYLE_protected())"

ROWS=1.3 COLS=11 ROWSPACE=0.5 IN="$FmtMinSec($LapTime(y))" RESETBY=($Lap)>


All I did was move a couple of the tabs and increase their count to around 700. You'll have to play around them to get them aligned. So the tabs need to be before the XYTABLE arguments to get them properly positioned.


Top
 Profile  
 
 Post subject: Re: Custom Runlog Pages
PostPosted: Sat Jun 24, 2017 11:21 pm 
Offline

Joined: Sun Sep 27, 2015 9:55 pm
Posts: 75
You blood is worth bottling, many thanks again :)


Top
 Profile  
 
 Post subject: Re: Custom Runlog Pages
PostPosted: Sat Jun 24, 2017 11:29 pm 
Offline

Joined: Sat Apr 11, 2009 2:05 am
Posts: 54
Hahahaha. Well thank you. I've spent MANY hours playing but I still feel like I know very little. There is definitely much I don't understand. I do a lot of trial and error.


Top
 Profile  
 
 Post subject: Re: Custom Runlog Pages
PostPosted: Sun Jun 25, 2017 4:21 am 
Offline

Joined: Sun Sep 27, 2015 9:55 pm
Posts: 75
Spent my day off (in Auckland, New Zealand) working on a new report, thanks to dasing :)

Need to see if there is a way to format numbers and round, but happy with the result. A little more data to add (suspension settings and hot pressures).


ImageTire_Data by Eipeip, on Flickr


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 37 posts ]  Go to page Previous  1, 2, 3, 4  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group